1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 178Get this manual

1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 178

CHART No pressure reading on gage #1 or #31Cycle motor in both direction to allow any trapped air to be removed2Ensure manual release is closed tightly3Remove manual release snap ring, remove valve core, check O-ring and valve seal 4Remove -6See Figure 9-8on P-2
Check O-ring

5Check for clogged pump filterclean filter and change oil if necessary6Inspect pump ballcheck valves for free movements
7Inspect pump and manifold face for dirt andor heavy scratches

Remove V-2See Figure 9-8Check for:

Back to 1976 Evinrude 200 HP Outboards Service Manual, PN 5199