1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 173Get this manual
TROUBLESHOOTING THE HYDRAULIC SYSTEM (CaNT PROBLEM Will not trim or tilt inWill trim and tilt outTROUBLESHOOTING STEPS Refer to Figure 9-91Check to ensure motor is reversingFollow Chart D2Check V-7 and V-5Follow Chart F3Check pump face for dirt or heavy scratches4Check manifold face for dirt or heavy scratches in area of -8 and pump outlets5Check V-8, follow Chart F6Remove C-1, check for: aa-ring cuts bChips out of or cuts in seat cMetal chips or dirt on seat 1Check to ensure motor is reversing, follow Chart D2Ensure manual release is closed tightly3Remove manual release core, check valve seal4Check P-2 for broken or bent tangs5Check V-1, follow Chart G6Check2, follow Chart C7Remove pump, check high pressure outlet a-ring1Check tilt cylinder oil lines for leaks2Remove manual release core and check a-ring3Check reservoir fill plug a-ring4Check pipe plugs for leaks5Remove trim cylinder end caps and check a-rings No tilt or trim out, will tilttrim in