1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 128Get this manual
cInstall two Truarc rings using Truarc pliers (Special Tool #311879)See Figure 6-94SAFETY WARNING Retaining rings are under extreme pressures during removal and installationWear safety glasses and proceed with care to avoid unsnapping ring from pliers dIf removed, install new bearings in propeller shaft bearing housingFor large forward end bearing, use (Special Installer Tool #314641)See Figure 6-95For small rear end bearing, use (Special Installer Tool #321517)See Figure 6-96Install new seals back to back (one seal lip faCing out and one seal lip faCing in) using (Special Installer Tool #321562)See Figure 6-97