1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 118Get this manual
PROPELLER SHAFT BEARING HOUSING Oil retainers can be removed by driving them outBearings may be removed in the same manner, if necessarySee Figure 6-60 1Screw 2Screen
Figure 6-62Oil Pump Cover Screen cIf necessary to service oil pump pressure valve or replace forward gear bearing and cup assembly, remove bearing cup by tapping out of oil pumpAccess holes are provided in pumpSee Figures 6-63 and 6-6463638
Figure 6-60Removing Bearing Housing Rear Bearing OIL PUMP aRemove screws and lockwashers, and lift cover from pump housingSee Figures 6-41 and 6-61Oil pump, cover, and gears are serviced as an assembly