1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 78Get this manual
dRemove four screws (lower crankshaft head to lower bearing retainer plate) and remove lower crankcase head from crankshaftSee Figure 5-34Remove seal by driving out with punch and hammerSee Figure 5-35Remove and discard the "0" rings eInspect ball bearing at lower end of crankshaft and remove if damagedUse truarc pliers No4 (Special Tool #307429) to remove retaining ring under bearingUse OMC Universal Puller (Special Tool #378103) provided with four screws (Part #316296) 1 4-28 3" long, threaded into the tapped holes in the bearing retainer plate to remove bearingSee Figure 5-36
1Retainer plate 2Bearing 3Universal puller #3 78103