1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 72Get this manual
kRemove one screw and one nut each (port and starboard) at front of power headSee Figure 5-191Remove long screws (three each, port and starboard)See Figure 5-19 1Lifting eye #321537 2Universal puller #378103
3Puller set screws and washers
Figure 5-20Removing Stripped Down Power Head 1Stud nut (one each port and starboard 2Short screws (one each port and starboard) 3Long screws (three each port and starboard)
Figure 5-19Power Head to Adapter Screws and Nuts mReinstall the flywheel and tighten but do not torque flywheel nutAttach body from OMC Universal Puller part number 378103 to flywheel with three screws and washersThread OMC Lifting Eye part number 321537 into body until point engages taper in crankshaftTighten lightlyLift power head from exhaust housingSee Figure 5-20