1976 Evinrude 200 HP Outboards Service Manual, PN 5199, Page 35Get this manual
out to obtain proper adjustmentSee Figure 3-36Warm-up lever adjustment should be checked and redone if required when the engine idle speed is changed enough to require throttle cable trunnion adjustmentSee Section 8 1Throttle cam 2Cam follower adjustment screw 3Cam follower roller 4Bottom mark
Figure 3-34Throttle Cam Adjustment
The throttle cam on engine is marked STARTWhen warm-up lever on control box is moved to START position, the START mark on throttle cam should center on cam rollerSee Figure 3-35If it does not, turn the stop screw in control box in or