1975 Evinrude 2HP Model 2502 Full Factory Service Manual, Page 48Get this manual

1975 Evinrude 2HP Model 2502 Full Factory Service Manual, Page 48

7-3 dCarefully lift the pulley straight off the starter housing so that the spring remains in the housingSee Figure 7-6
eJar the housing, bottom side down, on the bench to dislodge spring
rRemove four starter pulley plate screws and plate to remove rope from pulleySee Figure 7-7PULLEY PLATE

Figure 7-6

ATTACHING

Figure 7-7

CLEANING, INSPECTIONAND REPAIR

Back to 1975 Evinrude 2HP Model 2502 Full Factory Service Manual