1975 Evinrude 2HP Model 2502 Full Factory Service Manual, Page 30Get this manual
SAFETY WARNING High voltage is applied to the condenser in the leakage testHandle leads carefully and turn elector switch to "Discharge" before disconnecting leads from condenser after performing this testBREAKER POINT TESTING
It is possible to check the electrical condition of the points with the ignition analyzerConnect one test lead to the breaker arm, and connect the second tes lead to the break assembly scre te rminalIf the points are good, meter eading will be in the gr een area on the "Breaker Test" scale II eading is in ed area, do not immed iate ly
Figure 4-13 Breaker Point Testing
r eject the points, but heck the test le ad connections to make sure that they are ti ghtA secure contact is necessary because of the current us ed in this testSee Figur 4-1 3