1974 Johnson 40 HP Outboard Motors Service manual, Page 38Get this manual
REASSEMBLY OF ARMATURE PLATE Reassemble components which were removed from the armature plate, following the reverse order of disassembly and paying particular attention to the following:
a Correct locating of the driver coil and lamina-
bReconnect all leads on the armature plate, making ure that connections are clean and tightBend condenser leads down so they cannot rub against flywheelcMake sure that new oiler wick is installed under the drive coilSee Figure 4-29:
tion assembly is governed by machined mounting surfaces on the armature plateCoil lamination heels should be flush with machined surfacesSee Figure 4-27