1972 Johnson 2HP Outboard Motor Service Manual, Page 45Get this manual
manual starter engages the power head f1ywheel ratchet with pawl when the starter handle is pulledspring winds tight the unwinds and rewinds the handle is returned to the starter housing
DISASSEMBLY OFSTARTER
the starter out far enough to tie knot in the Untie knot in end of Remove handle and See Figure 7-5Release the knot, and the starter back until the starter drum is fuHy unwoundRemove the retaining ring, starter pawl, and friction springSee Figure 7-2Remove the starter spindle screwHold the down in the housing and lift out the spindleSee Figure 7-3
Never release the handle at end of stroke, allowing to snap backSeriQus damage could
REMOVAL OF STARTER