1972 Evinrude StarFlire 125 HP Outboards Service Manual, PN 4822, Page 11Get this manual

1972 Evinrude StarFlire 125 HP Outboards Service Manual, PN 4822, Page 11

NOTE Retorque cylinder head screws (18-20 ftlbs and spark plugs after motor has been run and has reached operating temperature, and has cooled comfortable to touchLower unit Pull at propeller shaft to overcome reverse lock 640 to 710 lbsST ANDARD SCREWS FtLbsInLbsInLbsFtLbsSize Size 5-7 60-80 No6 7-10 1 4" 10-12 No.8 5 16" 120-140 15-22 18-20 2-3 No10 3 8" 220-240 25-35 28-30 340-360 3-4 No12 35-40 .7 16" These Torque Values apply Wlless otherwise specified
LUBRICATION CHART
LUBRICATION POINT 1Starboard Tilt Lock Lever See Figure 2-7 2Carburetor Linkage See Figure 2-8 3Cover Latches, Front and Rear See Figure 2-4 4Choke and Low Speed Adjustment Linkage See Figure 2-9 5Gearcase See Figure 2-10 FREQUENCY (PERIOD OF OPERATION) FRESH WATER #SALT WATER 60 days 60 days 60 days 30 days 30 days 30 days

LUBRICANT OMC Type "A" OMC Type "A" OMC Type "A"

OMC TypeA" Check level after first 10 hours of operation and every 50 hours of operation thereafterAdd lubricant if necessaryDrain and refill every 100 hours of operation or once each season, whichever occurs first60 days 60 days 60 days 60 days Same as Fresh Water Same as Fresh Water 30 days 30 days 30 days 30 days