1971 Johnson 2HP outboards Service Manual, Page 7Get this manual
1-3 Service Manual, in many cases in actual useRefer to the Special Service Tool Catalog for description and ordering instructions for these tools1Starter rope pulley 2Steering handle 3High speed knob 4Steering friction screw 5Water pump 6Oil drain and fill plug 7Exhaust outlet 8Exhaust relief and water outlet 9Reverse lock 10Exhaust housing 11Fuel valve 12Motor rest 13Speed control 14Fuel vent 15Filler cap 16Model and serial number plug 17Swivel bracket 18Pivot brgretainers 19Propeller 20Skeg 21Water intake 22Tilt rod 23Clamp screw 24Model and serial number plate 25Choke 26Low speed needle 27Rewind Starter
OUTBOARD MOTOR NOMENCLATURE
Sometimes the words "right" and "left" are very confusing when referring to the sides of an outboard motorTherefore, the sides are referred to as STARBOARD or PORT sidesSTARBOARD means on the right hand while facing the bow (FRONT) of the boat; PORT means left handSee Figures 1-1 and 1-2Service required for the HP motor is generally one of three kinds 1NORMAL CARE AND MAINTENANCE, which includes putting new motor into operation, storing motors, lubrication, and care under special operating conditions such as salt water and cold weatherOPERATING MALFUNCTIONS due to improper motor mounting, propeller condition or Size, boat condition, or the malfunction of some part of the motorThis includes motor tune-up procedures to keep the motor in prime operating conditionCOMPLETE DISASSEMBLY and overhaul, such as inspecting motor that has been submerged, or rebuilding trade-in units3