1971 Evinrude Fisherman 6HP outboards Service Manual, Page 34Get this manual
dPlace magneto in position over crankshaft, being careful not to damage breaker arms on camDo not bend cam followerTighten four Phillips head screwseReplace armature link and spring clip cPlace timing fixture (Special Tool #383602) on craiiksfiaItmrafe the crankshaft so that the side of the fixture marked "T" (top) is aligned with the first projections on the armature plateSee Figure 4-20
fCheck breaker point settings as described under "Breaker Point Adjustment"gCheck crankshaft and flywheel tapers for any traces of oilThis assembly must be perfectly dry swab tapered surfaces with solvent and blow dry with compressed airInspect both tapers for burrs or nicks
Rotate the crankshaft in clockwise direction only
DO NOT permit solvent used to clean tapers to wash oil out of oiler wickhReplace flywheelCheck for spark on each cylinder by connecting the spark plug high tension leads to spark checker (Stevens Experimental CoPart #S-21 or S-13)Tighten flywheel nut to torque specified in Section 2iConnect the high tension lead wires to the spark plugsMake sure that the spring clips in the spark plug lead covers make firm contact with the spark plug terminals