1970 Evinrude Ski-Twin, Ski-Twin Electric 33 HP Service Manual 4687, Page 68Get this manual
REMOVAL OF STARTER FROM POWER HEAD Due to the construction of the starter motor, maintenance operations are generally limited to periodic
DRIVE END HEAD FIELD AND ASSEMBLY BRUSH AND TERMINAL HOLDER BRUSH CO'MMU-TATOR HEAD jSLEEVE
WA1)HER 132"WASHER THRUSTt6lI
Figure 7-6Starter Motor Test checking for looseness of Unless it is certain that the starter motor requires attention, do not remove it for overhaulA thorough check should be made of the battery, cables, starting solenoid, and switch as outlined in the Trouble Check Chart in Section 2Check the starter motor by using the no load testWith 10.0 volts applied to the starter motor, maximum current should be 60.0 amperes and minimum speed should be 8000 rpmSee Figure -6If it has been determined that the starter motor is malfunctioning, removal can be accomplished as follows: aDisconnect lead to starter motor