1970 Evinrude Ski-Twin, Ski-Twin Electric 33 HP Service Manual 4687, Page 61Get this manual
Figure 6-22Tilting Friction
Figure 6-20Filling Gearcase cInstall propeller, using new drive and cotter pins, and fill gearcase with OMC Type "c" lubri cantSee Figure 6-20
LOWER UNIT AD-JUSTMENTS
SHIFT LEVER After assembly of the lower unit, it is necessary to check the gear shift adjustmentThe shifter dog should engage the forward and reverse gears properly and take free position when in neutralTo check, place shift handle in neutral and check to see that propeller rotates freelyFigure 6-23Steering Friction Move shift handle into forward gear, rotating propeller clockwise to engage shifter dog with forward gearNote point of engagement, and note point where shift lever pin rides in forward detent in shifter lockRepeat action for reverse gear The shifter lever pin should stop an equal distance from the neutral detent but closer to neutral in forward gear to allow for positive forward gear engagementIf adjustment is needed, loosen the shift handle clamp and adjustment screwsSee Figure 6-21Adjust shift handle as required, tighten screws, and recheck adjustment