1970 Evinrude Ski-Twin, Ski-Twin Electric 33 HP Service Manual 4687, Page 55Get this manual
driveshaft pinion gear rotates constantly with the operation of the motor and drives two bevel gears which revolve freely on the propeller shaftThe clutch shifter dog is splined to the propeller shaftIn neutral operation, the shifter dog with detent spring and balls is centered between the two gears, which revolve in opposite directions, and remains motionlessIn forward or reverse operation, the shift lever causes the shifter dog to engage either gear Power is then transmitted from the rotating gear, through the shifter dog, to the propeller shaft and propeller REMOVAL OF GEARCASE
It is possible to remove the lower gearcase as-
Figure 6-5Gearcase Attaching Screws
sembly without removing the power head from the motorHowever, if disassembly of the exhaust housing is required, it is necessary first to remove the power headSee Section for instructionsThe gearcase assembly may be removed from the exhaust housing and power head as follows:
REMOVAL OF EXHAUST HOUSING, STEERING AND STERN BRACKETS