1968 Evinrude Starflite 100 HP outboards Service Manual, Page 67Get this manual
Screw to release tension on steering friction springRemove screw and washer from bottom of pivot shaftTo detach front exhaust cover from SWivel bracket, drive pivot shaft up from bottom and remove from topTag upper and lower thrust washers to assure correct reassemblySee Figure 6-11STERN BRACKET AND SHOCK ABSORBERS aRemove the thrust rod and retainer, and thrust rod spring from the stern bracketbRemove two screws fastening port and starboard stern bracketsRemove tilting shaft bolt, nut, spring, and washers from top of stern bracketscRemove retaining rings and washers holding shock absorbers to swivel bracketRemove stern brackets and shock absorbers together from swivel bracket and pivot pinSee Figure 6-12dRemove top and bottom seals and needle bearings from swivel bracket TILT SHAFT BOLT