1968 Evinrude Starflite 100 HP outboards Service Manual, Page 39Get this manual
failures by using the ignition analyzer and standard V-4 motor ignition coilConnect the coil to the ignition analyzer as for the coil testConnect separate test lead with suitable clips to the secondary terminal of the coil (by-pass the MA-12 resistor adapter when using the Stevens Model MA-75 ignition analyzer) and to the conductor of the component being tested (lead terminals on distributor cap, rotor arm, spark plug high tension lead)Probe the entire insulated surface of the component being tested with the grounded test probeSee Figure 4-18Arcing will be apparent wherever the insulation has broken down, due to moisture or carbon trails REASSEMBLY OF DISTRIBUTOR
aInstall reverse cutout springUse Shell EP-2 grease on springSee insert, Figure 4-16Lubricate nylon base retainer with oil and install on distributor base assembly, flat face upSee Figure 4-21Attach base to crankcase bearing head with clips and screwsConnect link to ball joint by preSSing into position