1968 Evinrude Starflite 100 HP outboards Service Manual, Page 26Get this manual
around the edges of the valves will cause improper functioning of the chokebReassemble the automatic choke arm assembly, making sure that the choke spring is properly installedChoke spring must hold choke valves closed when the choke knob is in the "ON" position, and must hold the choke valves open when the choke knob is in the "OFF" positionChoke valves must be free to open under spring tension at all times regardless of the choke knob positioncCheck the choke for free operationChoke valves must move freely, without bindingdInstall choke solenoid and spring aligning scribe mark on solenoid case with edge of retaining strapIf installing new solenoid adjust position of choke solenoid so that end of plunger measures 38" from front of solenoid caseSee Figure 3-29 bInstall throttle cam and bushings on carburetor bodyAttach throttle linkage to throttle cam with anchor yoke pin and cotter pincConnect solenoid wires at Packard terminaldConnect fuel and float chamber vent hoses to carburetoreInstall air inlet shield
CARBURETOR ADJUSTMENTS