1968 Evinrude Speedifour, Starflite 85HP Service Manual, Page 22Get this manual
U leakage still exists, remove the lead shot with an appropriate sharp toolSee Figure 3-19Clean and inspect casting openingdIf the casting opening is normal, instal1 new lead shot in casting opening and flatten out with light hammer tapsCheck for leakage Figure 3-20Disassembling Leaf Valves
REASSEMBLY OF CARBURETOR
GENERAL INSTRUCTIONS Reassemble the carburetor, paying particular attention to the fol1owing proceduredust, dirt, and lint out of the carburetor during reassemblysure that parts are clean and free from gum, varnish" and corrosion when reassemDlirig themReplace gaskets and sealing washersDO NOT attempt to use original gaskets and washers, as leaks develop after the engine is back in useCARBURETOR Figure 3-19Removing Lead Shot Reinstal1 the high-speed orifice plugs and screw plugs