1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 72Get this manual
eInstall reverse coil, carefully feeding blue lead through opening in gearcaseAlign lead with recess in gearcasefMake sure leads are correctly positioned and free of all obstructions, and that green lead is well protected by metal guardSecure leads in nylon retainer with washer and screwDo not overtighten screw (3) Shift cable retainer at upper end of stud is in position between cable and studqApply Sealer 1000 between cable retainer, gearcase and rear stud nut to prevent exhaust gases from entering lower gearcaseSee Figure 6-24rInstall new stud nuts and tighten to specified torquesInsert driveshaft in gear housingto mesh with pinion gear splinesTwist slightly