1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 64Get this manual
Figure 6-23Pulling Pinion Bearings
Figure 6-21Removing Drive Pinion
DISASSEMBLY OF ELECTRIC SHIFT GEARCASE
aRemove cotter pin, propeller nutdrive pinthrust washer and propellerDrain gearcasebRemove water pump as described in Disassembly of Water P,u mpcRemove screws attaching bearing cap assembly to gearcase and pull driveshaft and bearing cap from gea rcaseSlide bearing cap from driveshaft and remove eaL If damagedpr ess bearing from bearing cap dRemove the two lower gearcase stud nuts, the stud washer, and shift cable retainerA 9 16 inch deep socket is required to remove stud nutsDiscard the nuts, since they are not to be re-usedThese are self-locking nuts and lose their locking ability after being removedSee Figure 6-24