1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 46Get this manual
bDisconnect all electrical connections from motor cable, including ignition, safety switch, temperature switch, shift cable, and alternator, if used, and starter leadsIdentify leads to assure correct reassembly cRemove front and rear lower motor covers, and rear exhaust housing cover dRemove carburetor, leaf valve assembly, fuel pumpfuel hoses as described in Section 3Remove heat exchanger tubeeRemove manual starter, if used, as described in Section 9fRemove ignition coil, flywheel ring gear coverand distributor or magneto, as described in Section 4gUSing an appropriate flywheel holding fixture, remove flywheel attaching nutRemove flywheel, USing puller (Special Tool #3781 03)See Figure 5-8hRemove generator stator and starter motor with Bendix drive as described in Section 7iDisconnect thermostat hosesRemove cylinder heads and bypass covers Figure 5-11Power Head on Bench for Disassembly