1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 40Get this manual
cCheck the pickup position of the throttle with the camThe roller should begin to open the throttle as the center of the roller shaft aligns with the mark on the camSee Figure 4-29dIf this adjustment is incorrect, adjust as described in Paragraph "Cam Follower Adjustment", Section 3 eHolding the control shaft against its stop in the full throttle position, check that the throttle arm is against its stop on the carburetorCorrect adjustment, if necessary, by removing link pin and turning yoke on throttle control rodSee Figure 4-30
Figure 4-30Adjusting Distributor Linkage
The carburetor and distributor linkage are correctly synchronized when the throttle control shaft and the throttle arm reach their full open positions at the same time, and the distributor reaches full advance position as described aboveSee Figure 4-30