1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 33Get this manual
Figure 4-9Removing Cam lSHAFT
grit as it turnsMove the shaft slowly from side to side and up and down to check for side or end playShaft should rotate freely and smoothly, without any play in any directionSee Figure 4-14If necessary to remove or replace bearings, use an arbor press and suitable support, such as piston ring compressorDO NOT hammer on bearings or shaftWash bearings in grease solvent and repack half full of high-speed ball bearing grease having high (340 melting pointeMost testing on the distributor can be performed without disassembly of the condenser, breaker pOints, etc from the breaker plateIf replacement is necessary, all components can be removed from the breaker plateThe spark plug high tension leads can be unscrewed from the distributor cap by turning counterclockwise