1967 Evinrude StarFlite 80 HP Outboards Service Manual, PN 4359, Page 32Get this manual
Figure 4-5Removing Rotor
dRemove ignition coil and ring gear cover
eRemove the three bracket mounting screws and slide distributor bracket forward to release belt tensionLift belt off pulleyDistributor bracket and bearing assembly may now be removed from motorSee Figure 4-7
Figure -7Distributor Prepared for Removal
DISASSEMBLY OF DISTRIBUTOR See
Figure 4-8
aTo remove cam from distributor shaft back off nut one full turnUse two screw drivers to pry off camRemove distributor shaft cam keySee Figures 4-9 and 4-10bRemove hex nut, lock washer, and flat washer attaching pulley to distributor shaftSee Figure 4-11cRemove cap from bottom of distributor housing and sleeve assemblyUse Truarc No4 pliers (Special Tool307429) to remove large Truarc retaining ringThis will separate the distributor housing from the distributor bracket and expose the large needle bearing pressed into the distributor bracketSee Figure 4-12NOTE