1965 Evinrude SportFour Heavy Duty 60 HP Outboards Service Manual, 4204, Page 37Get this manual
SCRIBE MARK
CLAMP SCREW
Figure 4-25Second Timing Mark
THROTTLE ARM
Figure 4-27Throttle Adjustment lerLoosen clamp screw and move throttle arm to its limit to close throttle valvesMake sure the roller is contacting the cam and retighten clamp screwfReplace the carburetor synchronizing rod through the pivot pin leaving set screw looseWith engine in forward gear, advance throttle lever to full open position and insert .020" feeler gage between the control shaft arm and the stop on the control shaft bracketSee Figure 4-28Hold cam in wide open position and tighten set screwReplace lock screw
Figure 4- 26Throttle Arm Alignment