1965 Evinrude 90 HP StarFlite Service Manual, PN 4206, Page 36Get this manual
the bearings are in need of cleaning or inspecti onCheck for wear and dirt in the bearings by rotating the shaft slowly by hand, noting any roughness or grit as it turnsMove the shaft slowly from side to side and up and down to check for side or end playShaft should rotate freely and smoothly, without any play in any directionSee Figure 4-13If necessary to remove or rep lace bearings, use an arbor press and suitable support, such as piston ring compressorDO NOT hammer on bearings or shaftWash bearings in grease solvent and repack half full of highspeed ball bearing grease having high (340 melting point NOTE
It will be necessary to remove Truarc re-