Honda Outboards BF40A/BF50A Service Manual, Page 400Get this manual
13GAS ASSISTEDPOWER TILT 1POWER TRIMTILT ASSEMBLY
BF40A-BF50A
1POWER TRIMfTlLT ASSEMBLY
bDISASSEMBLY
CAUTION: Do not disassemble the gear pump assemblyIf it is faulty, replace it as an assembly Do not use shop towel, cloth, gloves, etc Do not reuse the drained automatic transmission fluid (ATF)a Do not hold at the outer tube when holding the power trimtilt assembly in vise during operationa Clean the removed parts in fresh automatic transmission fluid (ATF), and blow each port of the parts with compressed airSet the parts neatly in suitable container with care not to contaminate them with dust and dirt Do not reuse the O-rings oil seals Remove each valve and sleeve with care not to damage the sliding surface of the parts
[2] OIL HOLE CAP
[1] SCREW WASHER (4)
POWER TRIMfTILT MOTOR