Honda Outboards BF40A/BF50A Service Manual, Page 373Get this manual
BF40A-BF50A Loosen the lock nut fully and screw the cable pivot as shownTighten the lock nut to the specified torqueTORQUE: 1.3 N.m (0.13 kgf-m, 0.9Ibfeft) Apply grease to the sliding surfaces of the cable pivot Apply grease to the pivot point of the throttle arm, then install the throttle rod with the two 10 mm washers and mm w-clip Power trimtilt type only: Check whether the power tilt switch wire does not interfere with throttle rod[3]10 mm WASHER (2)
910 mm (0.350.39 in)