Honda GB40 Outboard Motor Manual., Page 25Get this manual
5Remove the holder case cover and e oil ring (oiled felt) from the internal groove the holder case
KReassembly Reassembly is the reverse disassemblyNote Set the notch of the upper plate the head portion of the joint tube bolt and allow the 52 thrust washer come the upper portion before installing the holder case and the cover, (Fig47)
4UPPER CASE
ADescription of upper case
The upper case is located at the upper portion the outboard equipment and serves as mounting base for the engineAlso provided with the case are controls such as loop handle, clutch, drive shaft, plus an oil inletThe case is connected the joint tube by four bolts(Fig48)