Honda BF9.9A-BF15A Outboard Motors Shop Manual., Page 113Get this manual
HONDA BFS.9A-BF15A
3) Align the projection on the cable clamp with the groove in
the cable, attach the cable clamp shim against the cable clamp, and install them on the steering bracket with the washers and 12 mm hexbolts
1 LOCK NUT
[41 12rnrnHEXBOLT
4) Turn the cable lock nut in or out until there is mm (0.31 in) from the cable endSet the lock plate on the shift pivotScrew the shift pivot about 10 turns until it contacts the lock nut
[I] SHIFT PIVOT
5) Apply waterproof grease the shift arm pin and install the
shift pivot on the shift armMove the remote control lever FORWARD, NEUTRAL and REVERSE, and check that the roller sits squarely between the appropriate teeth on the shift in each potion
[2] ROLLER