Honda BF9.9A-BF15A Outboard Motors Shop Manual., Page 84Get this manual
HONDA BFSSA-BPI5 A
CONNECTING ROD BIG END CLEARANCE
clean oil
1) Wipe the crank and connecting rod bearing surface
2) Set the plastigauge the crank pin, install the connecting
rods, and tighten the connecting bolts the specified torqueTORQUE: 12(120 kg-cm, 8.7 ft-lb) CAUTION
Do not rotate the crankshaft while the plastigauge is place
3) Remove the connecting and measure the plastigaugeStandard Service t
0.040-0.066m (0.001 6-0.0026 in)