Honda BF9.9A-BF15A Outboard Motors Shop Manual., Page 68Get this manual
HONDA BF9.9A-BF15A
CYLINDER HEAD, VALVE
aDISASSEMBLYREASSEMB Y
Loosen the tappet adjusting screw and nut on the valve rocker arms to disassemble the camshaft and valve rocker arm shaftVALVE COTTER (4) [INonly] CAUTION: To prevent loss of valve spring tensionDo not compress the springs more than necessary to remove the cottersUse the special tool to
t61 CAMSHAFT
INSPECTION: P.9-5
T41 VALVE ROCKER
TAPPET ADJUST1NG
INSPECTION: P.9-7,9-8 REASSEMBLY: Insert until the rocker arm rests on the cam lobe properly
Screw the 10 1.25 mm bolt into the shaft and remove the shaftINSPECTION: P.9-6