Honda BF9.9A-BF15A Outboard Motors Shop Manual., Page 66Get this manual
TIMING BELT, PULLEY [I1
27 mm LOCK NUT DISASSEMBLY REASSEMBLY: Hold the crankshaft with the special tool, and loosen tighten the lock nut
27 mm LOCK WASHER REASSEMBLY: Install so that the tabs of washer align the grooves in the timing pulleyTighten the 27 mm lock nut and bend up the two tabs so that the lock washer securely fits on the lock nut
Move the shift lever to "FORWARD" and remove the bolt[
[21-1CRANKSHAFT HOLDER NO.07923-
rnm PLAIN WASHER
Do not forget to installMake sure that the key is properly inserted in the key
27.5 N-m (275kg-cm, 19.9 ft-lb
DISASSEMBLY: Lift the belt with fingers and remove from the cam pulleyNever use screwdriver etcREASSEMBLY: Check the belt for wear, scores, scratches and other damage before installationINSTALLATION: P.9-3