Honda BF9.9A-BF15A Outboard Motors Shop Manual., Page 35Get this manual
THROTTLE ROD 1) Adjust the throttle cable (P3-512) Pass the throttle rod through the throttle rod holder, and
set the grip to "SLOWf' (until the grip touches the stopper)
3) Touch the throttle arm of carburetor the throttle stop screw, and then adjust the throttle rod position so that end positioned the left end of throttle arm slot allowing mm clearance (max shows Tighten the mm bolt on the throttle rod holder4) Turn the grip and make sure that the carburetor throttle
moves the full range from fully closed to fully open
[5] THROTTLE ARM
SHIFJ ROD
IRemove the shift rod joint from shift rod BSet the shift
lever to the "FORWARD" position, and screw in the shift rod joint so that edge mm (0.11 in) out of the lower mount edge