Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 395Get this manual
2Pass the remote control cable through the slit in the upper side of the oil case grommet B, and place the grommet in the original place 5Tighten the recessed bolt securely
THROTTLE STOP SCREW
3Set the remote control cable with the tie wrap band against the inside of the oil case grommet B4Attach the harness clip on the cable plate to fix the control cable BConnect the 4P blue connector and the 4P
white connector to the connectors at the outboard motor side, then install the connectors on the connector bracket C
CARBURETOR
THROITLE REMOTE ARM
5Place the Lengine under cover in the original place and tighten the mm screw-washer securely
REMOTE CONTROL CABLE (FROM REMOTE CONTROL BOX) OIL CASE GROMMET B
WHITE CONNECTOR