Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 392Get this manual
REMOTE CONTROL CABLE INSTALLATION REMOTE CONTROL BOX SIDE CONTROL HOUSING C
6 mm LOCK PIN (2)
THROTTLE CONTROL CABLE
EYE END (2)
CABLE CLAMP SPACER
1Remove the two screws and control housing C
5Reinstall the control housing and tighten the screwsTorque: N-m (0.2 kg-m, 1.4 ft-lb) THROTTLE CONTROL CABLE
2Screw the lock nuts and eye ends more than mm (0.3 in) onto the thread of the remote control cables and tighten the lock nuts securely to hold the pivotsApply marine grease to the hole of the eye endMore than mmin) 03
CABLE CLAMP SPACER THROTTLE ARM