Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 386Get this manual
3Calculate the installation height of the outboard motorBF8DlBF9.9DIBFlOD TRANSOM HEIGHT: type: 433 mm (17.0 in) type: 563 mm (22.2 in) type: 703 mm (27.7 in) 4If the outboard motor installation height does not conform to the above specification, adjust the transom height of the boatOUTBOARD MOTOR 7TwsoM HEIGHT BOAT TRANSOM HEIGHT
OUTBOARD MOTOR INSTALLATION
NOTE: Attach the steering cable to the outboard motor first, then install the outboard motor on the boat1Set the outboard motor onto the boat transom,
2Tighten the clamp screws securely and tie rope through the hole in the stern bracket and secure the other end of the rope to the boatNOTE: To prevent the outboard motor from falling accidentally, secure the stern bracket to the transom board with mounting bolts, nuts and washers
ANTICAVITATION PLATE
LAMP SCREW
MOUNTING BOLTS (COMMERCIALLY AVAILABLE) INSTALLATION
aREMOTE CONTROL TYPE