Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 373Get this manual
2, POWER TILT SWITCH aINSPECTION
The power tilt switch test can be performed with the switch installed on the tiller handleCheck for continuity between the terminals according to the table belowThere should be continuity between 0-0
Light green
Whitefblack
Light blue
Neutral0
bREPLACEMENT
1) Remove the spiral protector, then pull out the switch wires tacking care not to damage2) Remove the 10 rnm self-tapping screws and starter switch housing