Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 247Get this manual
4) Remove the four I0 mm self-tapping screws and lift up the starter switch housing with the starter switch attached (Type with electric starter)See page 15-6 for the starter switch replacement 1 0 mm I
SELF-TAPPING
5) Remove the throttle cable pin from the cable pivot6) Loosen the lock nut and remove the throttle cable pivot7) Remove the two 12 self-tapping screws and cable set plateSee page 15-7 for the emergency stop switch replacement
[31 STARTER SWITCH HOUSING
[I] THROlTLE
CABLE PIN CABLE PIVOT