Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 240Get this manual

Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 240

Install the emergency stop switch and ignition switch and tighten the lock nuts to the specified torqueInstall the ignition switch with the flat of the flange facing down as shown TORQUES: 16 mm Lock nut: 1.5 Nm (0.15 kgf'm, 1.1 Ibf-ft) 22 mm Lock nut: 4.9 N-m (0.49 kgf-m, 3.5 Ibf-ftl