Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 229Get this manual
3REMOTE CONTROL BOX aREMOVAL
I) Remove the engine cover2) Disconnect the remote control cables from the motor (P14-2)3) Disconnect the connectors and pull the blue connector from the connector holder[OIL CASE GROMMET
CONTROL BOX WIRE HARNESS
141 WHITE CONNECTOR 131 WIRE CLAMP
4) Open the wire clamp and remove the control box wire
harness
5) Remove the remote control box
bDISASSEMBLY
COVERS AND CABLES
I) Remove the two 25 self-tapping screws and control box cover B
MAIN WIREx
HARNESS CONNECTORS
2) Remove the lock pins and washers and disconnect
the control cables, two washers and cable clamp spacer