Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 140Get this manual
17) Connect the SE thermal valve wire connector and set the connectors and wires on the clamps of the starter case B 18) Connect the oil pressure switch wire terminal and set the wire on the clamps of the starter case B
SWITCH WIRE
SILENCER COVER
19) Connect the fuel filter to the fuel tube
[FUEL TUBE
20) Install the shift link rod to the shift shaft and install the washer on the shift link rodSecure it with new cotter pinTighten the shift arm pivot boltReplace the cotter pin with new one, when removed