Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 137Get this manual
7) Install the connector bracket and secure the two 14 m flange bolts
8) Connect the battery cable to the starter magnetic switch and secure it with the terminal nut9) Tighten the 12 flange bolts the ground terminals:battery ground terminal (Electric starter type)- regulatorlrectifier ground terminal (Electric starter type)- engine ground terminal
10) Route the wires and secure the wires with the wire bands as shownReplace the wire bands with new ones if they are cut
ENGINE GROUND TERMINAL 131
[I] REGULATORIRECTIFIER GROUND TERMINAL BATTERY GROUND TERMINAL 141 BATTERY CABLE ,