Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 133Get this manual
10) Unfasten the wire bands and remove the pulse generator connector (Blue) and exciter coil connector (Green)Disconnect the connectors11) Remove the 25 flange bolts, connector
CONNECTOR BRACKET A
BRACKET [3] IGNITION CONTROLVODULE
bracket and ignition control module12) Remove the 14 flange bolt and bracket
13) Unfasten the wire band at the starter magnetic switchRelease the charge coil wire and disconnect the battery cable from the starter magnetic switch by removing the terminal nut (Electric starter type only)14) Pull off the connectors from the connector holder,