Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 110Get this manual
1) Install new O-ring on the jet nozzle2) Install the jet nozzle and main nozzle and secure them
[I1 PLUG SCREW
[51 MAIN JET
with the plug screw31 Install the main jetTake care not to damage the jet and nozzle when handling them
NOZZLE 131 NOZZLE 141 :-RING
Do not reuse&
4) Install the float valve on the float tab as shown
5) Insert the float pin into the float and set them on the carburetor bodySecure them with the set screw