Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 84Get this manual
3) Install the lock nut to the shift rod and install the shift rod to the water pump housing4) Place the shift rod as shown and set the push rod to
[21 SHIm ROD B
the shift rod noting the installation direction
51 Align the pin holes of the push rod with the pin hole of the shift rod B, and drive the 2.5 11.8 mrn pin in from the chamfer side using commercially available pin driver
151 PIN DRIVER (Commercially available)
[PUSH ROD
6) Install the 2.5 11.8 rnrn pin to the shift rod as shown using commercially available pin driverThe projected length of both ends of the pin should be equal