Honda BF8, BF9.9 and BF10 Outboard Motors Shop Manual., Page 73Get this manual
fNEEDLE BEARING REPLACEMENT 1) Remove the water seal from the propeller shaft holder
using commercially available seal remover2) Remove the needle bearing using the driver, attachment 22 24 mm and pilot, 17 mm
121 ATTACHMENT, 22 24 mm
TOOLS: Driver Attachment, 22 24 mm Pilot, 17 mrn
07749 0010000 07746-0010800 07746-0040400
[ 1PILOT, 17 rnm 3
3) Press in new needle bearing with the driver, 14.5 18.5 mm and pilot 17 mm, using the hydraulic pressSet the pilot, 17 mm to the larger diameter side of the attachment as shown,
TOOLS: Driver, 14.5 18.5 mm Pilot, 17 mm